DX2 true-diversity receiver
Versatile twin channel reliability
Two sets of paired receivers
If you are frequently faced with situations where you need to record two signals (a conversation between an individually miked presenter and an interviewee for example), the DX2 is the solution.
Like the DX receiver, it’s true diversity but, with two sets of paired receivers built in, it can handle the signal from two separate transmitters. The unit can be attached directly to a sound mixer but is also compact enough to fit discreetly onto a video camera. In addition, it can also be used as a stereo link to send the output from a mixer to a professional camera.
It’s this versatility combined with clear, uninterrupted sound that makes the DX2 the perfect choice for documentary makers, ENG applications and HD video productions.
What is 'true diversity'?
Some manufacturers offer ‘diversity receivers’ with two antennae connected to only a single receiver. Signal switching
takes place between the antennae (at rf level) which means there is often an audible ‘click’ on the recorded sound as
the signal being delivered to the receiver is momentarily interrupted during switching. With the true diversity DX,
that problem doesn’t happen since switching takes place between the two receivers at the audio frequency level with
no interruption of signal.
The DX2 receiver can be externally powered from 6 – 18V DC allowing it to be camera mounted or placed in the mixer bag and powered from a single external source.
Easy setup menus
This unit is set up using a series of menus which are viewed in the OLED display. You are guided through the set up by a series of easy-to-read symbols and all parameters are selected using three buttons on the unit’s front panel. It’s so straightforward you won’t need any further written instructions from us.
OLED menu driven displays
This unit has an organic light emitting diode (OLED) display which is extremely clear yet consumes very little power. The screen shows all the important information you need to monitor the system when in use and also displays the En2’s unique easy set-up menu.
Frequency scan function
In an increasingly crowded environment, you need to be able to select usable frequencies on location quickly. So, all receivers in the En2 range have a built-in scan facility which allows you to scan for a free channel or scan for the transmitter. In addition, on this unit, selecting ‘tune’ mode brings up a spectrum analyser type display which allows you to see the RF in the local environment.
|Frequency range||470 - 960MHz (specify at time of order)|
|Switching bandwidth||Up to 40MHz in 25kHz steps|
|Number of audio channels||2 (can be operated individually if required)|
|Number of frequency tables||1|
|Number of factory pre-set frequencies||32|
|Number of user selectable frequencies||32 (selectable in 25kHz steps)|
|Scan Modes||Scan for free channel
Scan for transmitter
|Modulation Mode||Wideband FM|
|Sensitivty||-96dBm (3.5uV) for >40dB SINAD|
|Image rejection||> 80dB|
|Audio frequency response||50 – 18kHz|
|Signal-to-noise ratio||>100dB (±45kHz deviation)|
|Total harmonic distortion||<0.3% typ.|
|Audio output voltage||0dBV typ. (±45kHz deviation, 1kHz)|
|Audio output attenuator||0dB, -12dB, -24dB, -36dB (selectable)|
|Monitor/headphone output||30mW at 32?, adjustable|
|Output connector||Binder 7 pin screw-locking|
|Display||OLED blue, 128x32 pixels|
|Control||3 button navigation switch|
|Battery type||2 x 1.5V Alkaline LR6 AA size|
|Battery life||2 to 4 hrs depending on battery type
Audio Ltd recommend use of NiMh
|External supply voltage||6 - 18V DC (150mA @ 12V)|
|Operating temperature range||-20°C to +55°C|
|Dimensions||63mm (W) x 139mm (H) x 20mm (D)|
|Optional Accessories||Flexible clear antennae straight
Flexible clear antennae right-angle
Output cable 7 pin locking Binder with two XLR male connectors
External Powering Output cable with 4-pin
Hirose and two XLR connectors
Monitor/Headphone output cable
Other output cable types available on request